Razorweld JRW200AC/DC Page 8 Operating Manual Download

Page: 8 / 41

Razor

2OOAC/DC

TIG-MMA

Razorweld

Razor

weld

™

orw

eld

•

ear

s Warran

NIM

IG WARRA

(Po

wer Source on

)

Welds:

Aluminium, Magnesium, Zinc Alloys, Steels, Stainless,

Cast Iron, Bronze, Copper

RAZOR DIGITAL 200 AC/DC

TIG/ARC - Digital Inverter Welder

RWJFC-2D

Remote Foot Control as

Standard

MACHINE PACKAGE: JRW200AC/DC

Standard option includes: RAZOR200AC/DC Machine, WP/SR17 TIG Torch x 13ft, Earth Lead 1" x 13ft,

Argon Regulator, 6ft Gas Hose with fittings, Power Adaptor

TIG torch

Features

• Latest 43KHz Inverter Technology

• AC/DC HF TIG/ARC Function

- Arc Ignition HF Oscillation

- AC Square Wave 20 - 250Hz

- AC Balance Control Adjustable

- Pulse Frequency 1 - 200Hz

- Pulse Width 50%

- Base Current 5 - 200A

- Up Slope 0 -10 sec

- Down Slope 0 -15 sec

- Pre Gas 0 - 5 sec

- Post Gas 0.5 -20 sec

- Trigger Function 2/4T-Spot

• ARC

- Arc Ignition Current Automatic

- Arc Ignition Time Automatic

-Foot control as standard

TIG/ARC 200 Amp AC/DC Inverter

Welder Digital Control - 115/230V

Razorweld

Razor

weld

™

* Arc Set Optional

Overview

The RAZOR200ACDC is a Digital Controlled Square Wave AC/DC TIG inverter welder. Intelligent digital control of the main functions are realized by

intuitive software providing ease of operation and high accuracy. Full TIG functionality, offers simple step by step digital control of functions and

parameters providing complete professional control. HF arc ignition provides Pre Gas with instant arc ignition leaving no tungsten inclusion or

contamination of the tungsten electrode. Digital set of Pre Gas Time, Start Current, Up Slope and Down Slope Time, Finish Current Level and Post Gas

Time with the choice of 2T or 4T trigger function allows control of the welding process at a professional level from start to finish. Digital Pulse Control

gives full parameter setting of Peak & Base Current, Pulse Frequency & Pulse Width providing control of heat input, penetration & distortion. AC

Square Wave Balance gives control of the electron flow at the tungsten, the AC TIG arc can be adjusted from maximum oxide-layer cleaning on

aluminum through to a deeper penetrating weld. Remote Control Interface provides remote amperage control at the foot-pedal control. The

Selectable Tungsten feature allows the user to initiate softer arc starts when using small tungsten with thin metals avoiding burn through on their

work. When using a larger tungsten it requires a larger initial current and by selecting a larger tungsten size it avoids arc stutter or lack of arc

initiation. DC ARC welding delivers a smooth and stable arc for easy welding of electrodes producing high quality welds including cast Iron, stain-

less and low hydrogen. Arc Ignition and Arc Force control allows you to set the ideal arc condition no matter what electrode you choose.

Optimized auto protection of the power input provides auto shut down of the machine when large scale fluctuations occur. Unique air channel

design increases the heat dissipation of the power device, control circuits, minimizes dust absorption, thereby greatly improving longevity and

reliability. RAZOR200ACDC is the new standard for Dual voltage welders making it the ideal choice for both the experienced professional welder and

the weekend Warrior alike. Built to our specifications and manufactured in compliance to CAN/CSA 60974.1

MACHINE SPECIFICATIONS

Summary of Contents for JRW200AC/DC










































Search results

Summary of Contents for JRW200AC/DC

Reviews:

Related manuals for JRW200AC/DC

Brands by name

Popular brands

Razorweld JRW200AC/DC, Operating Manual

Search results

Summary of Contents for JRW200AC/DC

Reviews:

Related manuals for JRW200AC/DC

Brands by name

Popular brands