20
Razor
2OOAC/DC
TIG-ARC
Razorweld
Razor
weld
™
™
™
™
DC HF TIG Welding Standard Set Up Procedure:
Front panel set up procedure for basic HF DC TIG welding
Select DC TIG by pressing the
button
1. Select DC TIG Function.
2. Select Tungsten Diameter.
Set the pre gas time by
pushing the encoder
repeatedly, cycle through to illuminate the Pre
Gas
icon. Set the time by turning the
encoder knob. The set time will appear in the
digital display
3. Set Pre-gas Time
Set the Start Amps by pressing the encoder
to cycle through to illuminate the Start Amp
icon. Set the start amps by turning the encoder
knob. The set start amps will appear in the
digital display
until the DC icon illuminates. Select 2T or 4T
trigger function as required by the pushing the
button
to cycle through the trigger options.
The icon will illuminate for the selected trigger
option.
4. Set Start Amps
Set the Up Slope by pressing the encoder
to cycle through to illuminate the Up Slope
icon. Set the up slope time by turning the
encoder knob. The set up slope time will ap-
pear in the digital display
(2) Select the tungsten diameter required by
pushing the encoder r
r
epeatedly, cycle
through to illuminate the Tungsten Electrode
icon. Set the size required by turning the
encoder knob. The set size will appear in the
digital display.
5. Set Up Slope Time
Set welding amps by pressing
the encoder
to cycle through to illuminate the Peak Amp
icon. Set the amperage by turning the encoder
knob. The set welding amperage will appear in
the digital display
6. Set Welding Amperage
Set the down slope by pressing the encoder
to cycle through to illuminate the Down Slope
icon. Set the down slope time by turning
the encoder knob. The set down slope time
will appear in the digital display
7. Set Down Slope Time
Set the finish amps by pressing the encoder
to cycle through to illuminate the Finish Amps
icon. Set the finish amps by turning the en-
coder knob. The set finish amps will appear in
the digital display
8. Set Finish Amps
Set the post gas time by pressing
the encoder
to cycle through to illuminate the Post Gas
icon. Set the post gas time by turning the
encoder knob. The set post gas time will ap-
pear in the digital display
9. Set Post Gas Time