15
Razor
2OOAC/DC
TIG-ARC
Razorweld
Razor
weld
™
™
™
™
(5)
Set the Arc Force by selecting the Arc Force
icon pressing the Encoder Knob until the Arc Force
icon illuminates.
Turn the encoder knob to set the Arc Force accord-
ing to the electrode type and size being used. The
set Arc Force will show in the digital display panel.
Refer to Page 12 for instruction and explanation on
Arc Force Control
(3)
Select DC ARC Function.
Push the
button until the DC icon
illuminates
1.
Connecting the Welding Lead Set: Various electrodes require a different polarity for optimum results
refer to the electrode manufacturers information for the correct polarity. Most GP electrodes are
electrode connected to output socket, Earth Connected to the output socket
2.
Turn the power source on using the on/off switch located on the rear machine panel.
Set Up Procedure for ARC (Stick) Welding:
(4)
Set the amperage by selecting the Peak
Amp icon pressing the Encoder Knob until
the Peak Amp icon illuminates. Turn the
encoder knob to set the amperage according
to the electrode type and size being used as
recommended by the electrode manufacturer.
The set amperage will show in the digital
display panel.
(2) Turn on the Power source
using the on/off switch at the
rear of the machine
(1) Connect Electrode Lead
the
terminal
(1)
Connect the Earth Lead
lead to
Terminal
ARC (Stick Electrode) Welding Setup and Operation
* ARC SET OPTIONAL