11
Razor
2OOAC/DC
TIG-ARC
Razorweld
Razor
weld
™
™
™
™
Parameter selection: Select by pushing the Encoder Knob
repeatedly to cycle through the weld parameter icons. The
icon will illuminate
when selected.
Each push of the encoder knob will move the icon illumina-
tion in a clockwise cycle.
Front Panel Operation - Weld Program Selection
Shows selected icon
4a
- Weld Program -
Selection weld program parameters
Turn the Encoder to set
the Start Amp value
(Range is 5-200A)
Start Amp: Select by pushing the encoder
to cycle through to illuminate the Start Amp
icon.
The value selected shows on the digital
display. It is the amount of amps the
machine will deliver at the start of the
welding sequence.
Start Amp -
Provides selection for the amount of amps required at the start of the weld.
Turn the Encoder to set
the Pre-Gas Time
(Range is 0-3 Sec)
Pre Gas Time: Select by pushing the
encoder to cycle through to illuminate the
Pre Gas Timer
icon.
The value selected shows on the digital
display. It is the length of time the gas
will flow before the arc starts.
Pre Gas Timer -
Provides selection for gas flow time prior to the arc starting.
3.
Encoder Knob -
provides digital adjustment of welding parameters and provides step by step motion through the
weld cycle parameters.
Encoder knob weld parameter value selection
Turning the encoder will adjust the value of the parameters required.
The value selected will show in the digital display screen.
Encoder knob weld cycle function selection
Pushing the encoder will allow step by step selection of the weld cycle function.
The weld function selected will shown by the illuminated LED.
Turning the Encoder Knob will allow adjustment and setting of value for the weld function parameter
selected.
After selecting Starting Amperage you will be prompted to enter initial Arc "Soft Start" 0-20ms , after entering initial start amperage
start Amperage light will stay lit and display 0.0, select your desired initial delay from a range of 0-20ms.