80
Step 4: Adjusting and Attaching the Inflation Hose
2 Rigging the Razor BAT Wing
With the BAT Wing now attached to the Razor Harness the harness should be put
on so that the large diameter inflation hose and power inflator can be correctly
positioned. The large diameter inflation hose with the power inflator can be con-
figured to use from either the right or left hand side.
This can be changed easily to a left hand delivery
orientation if required by removing the 2 cable ties
locking the power inflator in place and then rotating
it 180 degrees before fastening with 2 new cable ties
to resecure it in place.
The BAT Wing is supplied with the large diameter
inflation hose and power inflator delivering from the
right hand side but it can be easily changed to deliver
from the left hand side if required as previously
noted.
The “clocking” of the power inflator is also supplied
with a right hand delivery orientation with the oral
inflation mouthpiece facing up towards the diver
with the power inflator button and Schrader valve on
the underside.
