75
BUNGEES
1
A simple overhand knot
tied into the end of the
bungee cord will hold the
right hand side bungee in
place. This knot should be
on the inside of the wing.
B
On the left hand side of
the wing a short waist bun-
gee cord is held in place
with 2 overhand knots tied
either side or the wing
grommet to secure it.
The BAT Wing Waist Bungee is designed to secure the sides
of the BAT Wing in a low profile streamlined position even
when the wing is inflated and still give easy unrestricted
access to all of the Razor Harness attachment points.
The waist bungee on the right hand side of
the BAT wing should have a long loop with
a small snap bolt attached to it. This will
feed across the waist and through the loop
of the crotch strap of the Razor
Harness and clip into the
short bungee loop attached
to the left hand side of
the BAT wing.
Step 2: Attaching and Adjusting the BAT Wing Waist Bungee
2 Rigging the Razor BAT Wing
A
B
