01.12.2017
- 4 -
raze-cat
•
Wear fitted clothing and no jewellery while working with the ES 2000,
since it may get caught in the ES 2000.
•
Use work gloves. Wear suitable footwork, as well as a hairnet, if you
have long hair.
•
Check the unit for potential damage and the movability of its individual
parts prior to use. Please ensure that only a recognized expert carries
out all repairs of potential damages. Do not work with a defective unit.
•
Clamp the to-be-worked-on ski or snowboard down tightly with the
base pointing upward, prior to grinding the edge.
•
Assume a natural posture and ensure a secure stance while you are
working.
•
Only work while fully concentrated and gently apply the pressure of
the ES 2000
to the ski’s edge.
•
For your own safety, only use parts and equipment recommended by
the ES 2000 manufacturer.
Electrical connection
Ensure that the mains voltage provided by your electricity supplier matches
the operating voltage (230V/50Hz) stated on the nameplate.
Operating instruction
Do not exert pressure on the unit during the grinding process. Otherwise there
is danger of the grinding belt tearing, resulting in damage to the ski or
snowboard edge. While working, do not hold on to the unit around the cooling
holes in order to avoid overheating its motor. Test the equipment on an old
ski first to learn how to handle the ES 2000 and find its ideal settings.
