01.12.2017
- 9 -
raze-cat
ATTENTION:
In the event of increased levels of material abrasion, the edge may get hot.
Ensure sufficiently long breaks between grinding sessions and only use
grinding belts that are intact.
Excessive pressure from the ES 2000 on the steel edge can damage the
grinding belt and/or the ski/snowboard edge. Furthermore, it may lead to the
ES 2000 being ripped from your hands. Blocking the grinding belt must be
prevented under any circumstances. For an optimal finish and adjustment of
the ski edge based on the skill level of the skier/ snowboarder only use
equipment recommended by the ES 2000 manufacturer.
Never pause on the edge with the ES 2000 while it is switched on!
Care and maintenance
Always keep the cooling holes of the unit clean. Pull the plug from the mains
before carrying out any maintenance or cleaning work.
The prolonged and intensive use of the ES 2000 may result in the
accumulation of grinding
dust inside the unit’s motor. In order to prevent this,
the device should occasionally be cleaned out with the help of compressed
air.
Warranty
The manufacturer guarantees the mandatory warranty in conjunction with the
purchase receipt and the warranty card. The warranty period begins with the
day of purchase. For that to happen the warranty card must have been filled
out completely on the day of purchase.
Covered by warranty are damages or defects, which have their origin in
material or production faults. Damages caused by improper use and/or
operation as well as overloading are not covered by warranty. For warranty
claims or repairs, please contact the vendor from which you have purchased
the ES 2000.