14 | 29
www.raytools.net
BM114S SERIES 6KW Laser Cutting Head User Manual
3.1.4
Dimension of Drive
3.2
FSCUT (BC)
with position mode
3.2.1
Wiring
The motor is AC servo motor, which should connect the
end of the drive L1, L2
,
L1C and L2C
to
AC
220V L and N. Please refer to figure 4.5 for the wiring connection mode and figure 4.4 for
the driver installation size
Limit signal
：
As shown in figure 4.2
Brown
White & Brown
Green
White & Green
+24V
0V
Up limit
Low limit
Note:
The limit sensor is NPN-NC and it continuously outputs 0V signal when it is not
triggered.
Figure4.4
—
Overall size of drive (unit: mm)
