15 | 29
www.raytools.net
BM114S SERIES 6KW Laser Cutting Head User Manual
Open the platform configuration tool, enter the value shown in Figure 4.6
1.
Set parameter as the figure (only for reference).
2.
Select J axis for detection, open loop and initiate enable to travel and detect the encoder
in (-14mm~+10mm) to determine the encoder direction.
3.
Save the parameters and enter the interface
Figure 4.6
—
Platform configuration tools
Figure4.5
—
Position loop FSCUT wiring diagram
Focus range was updated to "-20mm to 15mm" for
BM114S which was produced since Jan of 2020
