55
g
WARNING
To reduce the risk of electric shock, fire, explosion, serious injury or death:
Disconnect electric power to the washer before servicing.
Never start the washer with any guards/panels removed.
Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
W003
37989
POSSIBLE CAUSE
TO CORRECT
42. CONSTANT AGITATION
Inoperative timer.
Test timer and replace if inoperative.
Shorted or incorrect wiring.
Refer to appropriate wiring diagram.
Inoperative transmission assembly.
Repair or replace transmission assembly.
POSSIBLE CAUSE
TO CORRECT
Belt is tacky and does not allow proper slip.
Check belt and replace if defective.
Belt tension is too great and does not allow
Make sure idler spring is properly connected.
proper slip.
Inoperative timer.
Test timer and replace if inoperative.
Motor switch functions inoperative.
Check motor switch and replace if inoperative.
Bind in water pump.
Replace pump.
Brake pads binding.
Free binding pads, or replace pads.
Brake, transmission, or motor have locked
Check that all these components are able to move
up and will not turn.
freely. Correct binding component.
Incorrect voltage.
Contact local utility company, or have a qualified
electrician check power supply.
43. WASHER SMOKES, OVERHEATS, CYCLES ON MOTOR THERMAL OVERLOAD PROTECTOR, SWITCH
ACTUATOR KICKS IN AND OUT
