This shows a Transformer, that has been created and measured for the first time on June 1
th
2010. Profile and Measurement was saved by touching the ‘save’ button in Main Screen.
Then, this transformer was measured again, every 1
st
of a month. This means, that the
transformer was loaded from archive again
, measurement was done and the measurement
was attached by touching the ‘save’ button in main screen.
In our example, now it is the 1
st
of September. And again, the transformer is loaded and
measurement is done. This means, that a new measurement data block is created. And it is
saved and attached by touching ‘save’.
1
Please see chapter ‘8.1.2.3 Print and Save, Turns Ratio or Voltage Ratio’ for details
2
Please see chapter ’8.2.2 Load from Archive’ or ’8.4 Archive’ for details
90100-2.20 Instruction Manual TR-MARK III 250V
Page 19 of 68
