17
Page Name
Functions available
Home Page
Allows manual control of an individual illuminator or group of
illuminators including power adjustment, wavelength choice and
deterrent controls. Select override to operate above functions.
Settings / Groups
Allows detailed set-up and configuration of the illuminator
including how it responds to Photocell and External Inputs, light
type, duration on period, power levels, soft start, response to
group commands, deterrent patterns and speeds. Allows
illuminators to be allocated to a group or to create a new group.
Selectable control of illuminator either locally, by VMS or HTTP
commands.
Adv. Settings
Allows for further detailed setup of External Input, External
Output, Photocell sensitivity level and duration of Override.
Access
Change passwords
Network
Allocate IP address and other network settings, select DHCP
operation, allocate illuminator name
System Information
Indicates basic information about the illuminator. Ability to
restore factory settings or restart illuminator.
Diagnostics
Basic diagnostics to enable 1
st
level troubleshooting
Adv. Diagnostics
Advanced diagnostics to enable 2
nd
level troubleshooting
Software Update
Indicates current software / firmware version. Ability to upload
updated software / firmware version.
Log Off
We recommend logging off illuminator after every session
