RayTalk RB-100g User Manual Download Page 79

Page: 79 / 108

Other Settings & Features

Upgrade Firmware

The firmware (software) in the Wireless Access Point can be upgraded using your Web
Browser.

You must first download the upgrade file, and then select

Upgrade Firmware

in the

Manage-

ment

section of the menu. You will see a screen like the following.

Figure 59: Firmware Upgrade Screen

To perform the Firmware Upgrade:

Click the

Browse

button and navigate to the location of the upgrade file.

Select the upgrade file. Its name will appear in the

Upgrade File

field.

Click the

Upgrade

button to commence the firmware upgrade.

The Wireless Access Point is unavailable during the
upgrade process, and must restart when the up-
grade is completed. Any connections to or through
the Wireless Access Point will be lost.

Summary of Contents for RB-100g













































































































Search results

Summary of Contents for RB-100g

Reviews:

Related manuals for RB-100g

Brands by name

Popular brands

RayTalk RB-100g, User Manual

Search results

Summary of Contents for RB-100g

Reviews:

Related manuals for RB-100g

Brands by name

Popular brands