Setup
7.
From the menu, check the following screens, and configure as necessary for your envi-
ronment. Details of these screens and settings are described in the following sections of
this chapter.
•
Access Control
- MAC level access control.
•
Security Profiles
- Wireless security.
•
System
- Identification, location, and Network settings
•
Wireless
- Basic & Advanced
8.
You may also wish to set the admin password and administration connection options.
These are on the
Admin Login
screen accessed from the
Management
menu. See Chapter
6 for details of the screens and features available on the
Management
menu.
9.
Use the
Apply/Restart
button on the menu to apply your changes and restart the Wireless
Access Point.
Setup is now complete.
Wireless stations must now be set to match the Wireless Access Point. See Chapter 4 for
details.
If you can't connect:
It is likely that your PC’s IP address is incompatible with the Wireless Access
Point’s IP address. This can happen if your LAN does not have a DHCP Server.
The default IP address of the Wireless Access Point is 192.168.0.228, with a
Network Mask of 255.255.255.0.
If your PC’s IP address is not compatible with this, you must change your PC’s IP
address to an unused value in the range 192.168.0.1 ~ 192.168.0.254, with a
Network Mask of 255.255.255.0. See
Appendix C - Windows TCP/IP
for details
for this procedure.
13
