14
4.3. Default Info
No.
Description
Default
(1)
Device name
Raytac AT-UART
(2)
Base UUID
0x9E, 0xCA, 0xDC, 0x24, 0x0E, 0xE5, 0xA9, 0xE0
0x93, 0xF3, 0xA3, 0xB5, 0x00, 0x00, 0x40, 0x6E
(3)
Service UUID
0x0001
TX characteristic: 0x0003; RX characteristic: 0x0002
(4)
Baud rate
9600bps,n,8,1
(5)
Status of flow control
Disabled
(6)
RF TX power
+4dBm
(7)
32.768Khz oscillator
Using internal RC with 1000ms calibration time
(8)
Logic of BT connecting indicator
Output set as logic low when BT is connecting
(9)
PHY mode
1Mbps
(10)
Logic of wake-up pin
Set logic low to wake up in deep sleep
(11)
Advertising time
Forever advertising with no timeout
(12)
Status of DC-to-DC converter
Disabled
(13)
Connection interval mode
Set at min. 20ms and Max. 40ms for iOS/Android usage
(14)
Advertising LED pattern
0.5sec on / 0.5sec off
(15)
Connecting LED pattern
0.2sec on / 1.8secs off
(16)
Serial number
Display “ no data! ” string
(17)
ADC value
Value varies from input voltage between
0x0000 ~ 0x03FF (Hex).
(18)
State of response
Enabled
(19)
Programmable output GPIO
P0.12, P0.13, P0.14, P0.15, P0.16, P0.17, P0.18
and P0.19 are unused
Summary of Contents for MDBT42Q-AT-UART-S
Page 6: ...6 3 Reference Circuit...
