3
1. Introduction
This document shows how to use the demo board (MDBT42Q-AT-UART-S) to test function of
MDBT42Q-AT & MDBT42Q-PAT.
MDBT42Q-AT-UART-S is designed for testing and debugging without building your own
board. The board is only available with MDBT42Q-AT (chip antenna) module. MDBT42Q-AT
will be pre-programmed with Ray
tac’s AT command firmware. If you don’t need such
pre-programming and is looking for nRF52810 module, please check MDBT42Q-192K &
MDBT42Q-P192K.
Please visit our
website
for spec sheet of every module mentioned above.
1.1. Contents of the Set
Each set includes MDBT42Q-AT-UART-S x 1 and mini-USB cable x 1. Please contact us if
the set you receive is not complete.
Summary of Contents for MDBT42Q-AT-UART-S
Page 6: ...6 3 Reference Circuit...
