7
4. AT Command
4.1. List of supported commands
- Setting of device name
-
Choose data rate of 1Mbps or 2Mbps on-air
-
Set TX output power in 5 levels.
-
Set advertising time
-
Set connection interval under Mode 2
-
Enable/disable advertising
-
Set LED pattern indicating advertising or connecting status
-
7 sets of UART baud rates
-
Enable/disable UART flow control
-
Enable/disable interface of UART hardware
-
Support 8 programmable output GPIO
-
Power-down mode for power saving and GPIO wake-up
-
Support DC-to-DC and LDO power mode
-
Use internal or external 32.768KHz oscillator
-
Recover-to-default setting with hardware and software method
-
System reset of hardware and software
-
Set serial number and retrieve
-
Set or retrieve MAC Address
-
Retrieve ADC value for battery detection
-
Support maximum MTU 247bytes / data payload up to maximum 244 bytes
Summary of Contents for MDBT42Q-AT-UART-S
Page 6: ...6 3 Reference Circuit...
