4.5.11 Deleting a Memory Card Completely
Page 57
4.5.11 Deleting a Memory Card Completely
Setup Number: 43
With this setup function, you can delete a memory card completely, thus
preparing it for new writing processes.
Whenever you delete a memory card with this function, you do not only
delete the fundamental frequency values stored on it, but also any read or
write protection added to the contents of the card.
Please insert the memory card you want to delete in your Rayocomp PS 10.
Enter the setup number 43 and wait until a 0 is displayed. For safety reasons,
you must enter a 1 at this stage and confirm with the
OK
-key.
4.5.12 Initialising a Memory Card
Setup Number: 44
If you should come upon a memory card with illegible sticker, you can test
the card with this setup function and reinitialise it. The function works for
the memory cards of the bio-resonance according to Paul Schmidt and also
for the RAH “Green-Card”.
When initialising the memory card with this function, the system values of
the card are newly determined and written and all the stored fundamental
frequency values are deleted. If the card is read or write protected, this is
also deleted.
Please insert the memory card intended for initialisation in your Rayocomp PS
10. Enter the setup number 44 and wait until a 0 is displayed. For safety
reasons, you must enter a 1 at this stage and confirm with the
OK
-key.
