4.5.9 Providing Read-Protection for a Memory Card
Page 56
4.5.9 Providing Read-Protection for a Memory Card
Setup Number: 41
This setup function provides a read-protection for the inserted memory card.
If you use a read-protected memory card with a Rayocomp device, i.e. in F1,
the fundamental frequency values are set up but not displayed. This may
make sense when developing and testing new fundamental frequency values.
Please insert the memory card intended for read protection in your Rayocomp
PS 10. On entering the setup number 41, the display will either show 0 (card
is not read-protected) or 1 if the card already has read protection. A RAH
‘Green Card’ cannot be modified with a read protection.
If the card is still without read protection, please enter 1 and confirm your
entry with the
OK
-key.
Please keep in mind: the read protection of a memory card can only be
reversed by deleting it (see chapter 4.5.10).
4.5.10 Providing Write-Protection for a Memory Card
Setup Number: 42
This setup function provides a write-protection for the inserted memory card.
A memory card with write protection cannot be deleted by accident, nor can
other fundamental frequency values be stored on it.
Please insert the memory card intended for write protection in your
Rayocomp PS 10. On entering the setup number 42, the display will either
show 0 (card is not write-protected) or 1 if the card already has write
protection.
If the card is not write-protected yet, please enter the numeral 1 and confirm
with the
OK
-key to provide write protection for your memory card.
If the number 1 is displayed to show that your memory card is write-
protected, simply enter 0 and confirm with the
OK
-key to remove write
protection.
