4.1.4 Selecting the Menu with the
Mode
Key Page 15
When the Rayocomp PS 10 is switched on, the display of the device shows the
menu item “Direct”:
Now press the key:
The Rayocomp PS 10 changes over to
the menu item “F1-BnPS“ and
displays:
Press the following key again:
If now the Mode key is not pressed
again for a short moment, the PS10
will automatically start the input
mask, allowing you to enter the
BnPS programmes.
By pressing the Mode key again, the
Rayocomp PS 10 will switch over to
the RAH module. However, this will
only occur if the modules have
effectively been activated. Thus, if
either the Module 8, Module 9 or
Module 10 is activated, “RAH” is
indicated in the display for a short
moment. Subsequently, the RAH
programmes can be entered via the
input mask _ _ . _ _.
