Raymarine VCM100, Installation Instructions Manual

Page: 38 / 58

12. Referring to the following illustration, use the 4 nuts and
associated washers to secure the pedestal to the platform.
Tighten each nut to 30 Nm (22.1 lb ft) torque.
D10494-2
13. Ensure all 4 sets of nuts and washers are used to secure the
pedestal to the mounting platform. There should be no more than
6 mm of excess stud below the nut. Cut-off any excess stud.
D11780-1
6 mm
14. Retain the 4 spare nuts (which may have been used as a
temporary measure during Step 9).
Removing the radar pedestal lifting eyes
On the pedestal unit:
1. Loosen the first lifting eye securing bolt, enough to remove the
lifting eye.
2. Once the lifting eye is removed, re-tighten the bolt to 7 Nm (5.2
lb ft) torque.
3. Repeat Steps 1 to 2 to remove all lifting eyes.
Securing the radar antenna to the pedestal
Before attaching the antenna to the pedestal unit, ensure that:
38
HD and SuperHD Digital Open Array Installation instructions