Raymarine VCM100, Installation Instructions Manual

Page: 32 / 58

Radar scanner dimensions
D10487-2
1
2
48" - 1306 mm (51.4 in), 72" - 1918 mm (75.5 in)
402 mm (15.8 in)
324 mm (12.75 in)
111 mm
(4.4 in)
150 mm
(5.9 in)
151 mm
(5.95 in) 92 mm
(3.62 in)
140 mm
(5.5 in)
92 mm
(3.62 in)
412 mm (16.2 in) 59 mm
(2.3 in) minimum
Item Description
1 Maximum rotation
2 Center of rotation
Radar scanner mounting surface
Suitable radar scanner mounting surfaces include a mast platform,
an arch, or a bridge structure.
If mounting the radar scanner on a sailboat, it may be necessary
to install a radar guard to prevent the sails or any rigging coming
into contact with the radar scanner or mounting platform. Without
a proper radar guard the mounting platform and the radar scanner
could be severely damaged.
The following diagram illustrates suitable mounting surfaces for the
radar scanner:
D10486-1
Radar scanner mounting angle
Ensure the radar scanner rotates parallel to the water line.
The radar beam from the radar scanner is approximately 25° wide in
the vertical direction, to give good target detection even when your
vessel pitches and rolls.
32
HD and SuperHD Digital Open Array Installation instructions