• The
NO
soft key to discard any changes.
The
SETUP MODE?
entry screen is then displayed.
10. Press either:
• the
YES
soft key, if you want to use another setup function, or
• the
NO
soft key, to re-initialize the system using the new
settings.
Setting LNB local frequency
We recommend that you do NOT attempt to change the LNB local
frequency.
However, if you have to do so, contact the Raymarine Customer
Support Department for advice before making any changes.
1. Carry out the Enter setup mode procedure to display the
SET
SAT PAIR?
screen.
2. Press the
NEXT
soft key four times to display the
SET LOCAL
FREQ?
screen.
3. Press
YES
to display the
LNB TYPE:
screen.
4. Carry out the setting up procedure for single band or universal
band, as necessary.
• Single band frequencies are:
– Asia, 11300 Mhz.
– Japan, 10678 MHz
– Korea, 10750 MHz
– America. 11250 MHz
• Universal frequencies are:
– Low band, 9750 MHz
– High band, 10600 MHz
Setting single band LNB frequency
With the
LNB TYPE:
screen displayed:
1. Use the
PREV
or
NEXT
soft key to scroll to
SINGLE
2. Press
SELECT
to display the
LOCAL FREQ
edit screen
3. Set the required frequency as follows:
i.
Use the
+
and
-
soft keys to change the value of the character
above the cursor (underscore), as necessary.
ii. Press the
INPUT
soft key to accept each correct character
and move the cursor to the next character.
iii. Repeat sub-steps a, b and c until the correct frequency has
been entered.
4. Press the
ENTER
button to accept the frequency value and
display the
SAVE?
screen.
5. Press, either:
• The
YES
soft key to save the changes you have made, or
• The
NO
soft key to discard any changes.
The
SETUP MODE?
entry screen is then displayed.
6. Press either:
•
YES
if you want to use another setup function, or
•
NO
to re-initialize the system using the new settings.
Setting universal LNB frequency
With the
LNB TYPE:
screen displayed:
1. Use the
PREV
or
NEXT
soft key to scroll to
UNIVERSAL
2. Press, either:
• The
YES
soft key to save the changes you have made, or
• The
NO
soft key to discard any changes.
The
SETUP MODE?
entry screen is then displayed.
3. Press either:
•
YES
if you want to use another setup function, or
•
NO
to re-initialize the system using the new settings.
System operation and setup
35
