1. Press the
ENTER
soft key to display the setup entry page.
SETUP MODE?
YES
NO
D1
1
554-1
2. Press the
YES
soft key to display the
SET SAT PAIR?
screen.
This is the first screen in setup mode.
SET SAT PAIR?
PREV
YES
NEXT
D1
1
556-1
Setting the operating region
Use this procedure to set the appropriate geographic region.
With the ACU in setup mode:
1. Use the
PREV
softkey to display
LOAD REGION INFO?
.
2. Press the
YES
to display
CONTINENT
.
3. Use the
PREV
or
NEXT
softkey to cycle through the continent
names in the top line of the display, until the required continent
name is displayed.
4. Press the
SELECT
softkey to confirm the continent and display
REGION
.
5. Use the
PREV
or
NEXT
softkey to cycle through the region
names in the top line of the display, until the required region
name is displayed.
6. Press the
SELECT
softkey to confirm the region and display
the
LOAD?
screen.
7. Press either:
•
YES
to load the new settings. When the new settings have
been loaded, the system re-initializes automatically.
•
NO
to return to
SETUP MODE?
without making any changes.
8. If
SETUP MODE?
is displayed, press:
•
YES
if you want to remain in setup mode, or
•
NO
to re-initialize the system and return to operational mode.
Setting the default satellites
Use this procedure to set either two or three default satellites.
1. Carry out the Enter setup mode procedure to display the
SET
SAT PAIR?
screen.
2. Press the
YES
soft key to display the
SET TRIPLE SAT
screen.
3. If you are in an area where three satellites are available press
YES
. Otherwise, press
NO
.
4. Use the
PREV
or
NEXT
soft key to cycle through the satellite
names, in the top line of the display.
5. When the required satellite name is displayed, press the
SELECT
soft key to select this satellite as satellite A.
6. Repeat steps 4 and 5 to select satellite B.
7. If you are setting up triple satellites, repeat steps 4 and 5 to
select satellite C.
8. When the
SAVE?
screen is displayed, press the
YES
soft key.
9. When the
SETUP?
screen is displayed, press either soft key:
•
YES
if you want to remain in setup mode, or
•
NO
to re-initialize the system and return to operational mode.
Setting the remote control
Use this procedure to set up your remote control with the ACU.
With the ACU in setup mode:
1. Press
NEXT
to cycle through the options and display
SET
REMOCON?
.
2. Press
YES
to display the
CHANGE SAT
set screen.
3. Press
SELECT
to display the
PRESS A REMOTE KEY
screen.
System operation and setup
31
