Chapter 2: Setup Procedures
15
2.5 Sailboat setup procedures
Auto Tack Angle
The Auto Tack Angle feature allows you to specify
the angle through which the vessel will tack when
you select Auto Tack.
1. Press
MENU
, then use < and > to scroll to
Auto-
pilot Calibration
and press
ENTER
.
2. Use < and > to scroll to
Vessel Settings
and
press
ENTER
.
3. Use < and > to scroll to
Sailboat Settings
and
press
ENTER
.
4. Use < and > to scroll to
Auto Tack Angle
and press
ENTER
.
5. Use < and > to increase or decrease the auto
tack angle.
6. Press
ENTER
to accept the change or
CANCEL
to exit without making any changes.
Gybe Inhibit
Gybe inhibit prevents an accidental gybe. The
default setting is enabled, but you can disable the
feature if required.
1. Press
MENU
, then use < and > to scroll to
Auto-
pilot Calibration
and press
ENTER
.
2. Use < and > to scroll to
Vessel Settings
and
press
ENTER
.
3. Use < and > to scroll to
Sailboat Settings
and
press
ENTER
.
4. Use < and > to scroll to
Gybe Inhibit
and press
ENTER
.
5. Use < and > to enable or disable gybe inhibit.
6. Press
ENTER
to accept the change or
CANCEL
to exit without making any changes.
Press ENTER to select.
Sailboat Settings
Auto Tack Angle
D10861-1
Press ENTER to select.
Auto Tack Angle
i
D10860-1
Auto Tack sets the angle that the
vessel will tack through.
90
Press ENTER to select.
Sailboat Settings
Gybe Inhibit
D10857-1
Press ENTER to select.
Gybe Inhibit
i
D10856-1
Enable or disable gybe.
Disable
Summary of Contents for ST70 Instrument
