12
ST70 Pilot Controller Reference Guide
Display Response
The response setting determines the rate at which data readings update. You can
adjust the response at each pilot head to best suit the conditions under which you are
operating. You can independently adjust the response at each pilot head for individual
data types:
•
Speed
•
Depth
•
Heading
•
Wind Speed
•
Wind Angle
•
1. Use < and > to scroll to the
Response
box and
press
ENTER
.
2. Use < and > to scroll to the response parameter
you want to change.
3. Use < and > to increase or decrease the setting
as required, from 1 to 15, where 1 is slow and 15
is fast. You may have to experiment to find out
the appropriate response level for your vessel.
4. Press
ENTER
to accept the new value and exit,
or
CANCEL
to exit without making any change.
Autopilot calibration
Refer to the
ST70 Autopilot Controller/SmartPilot X Commissioning Instructions
.
Diagnostics
Use < and > to scroll to the
Diagnostics
box and press
ENTER
.
Press ENTER to select.
Display Settings
Response
i
D10822-1
Select display response.
Press ENTER to select.
Response
Speed
D10836-1
Press ENTER to accept.
Speed
i
D10837-1
< & > adjust response level.
CANCEL exits without saving.
12
Summary of Contents for ST70 Instrument
