5
Chapter 2: Setup Procedures
Many operating parameters are set during commissioning and may not need to be
changed again. However, if any of these parameters are not as you want them, you
can change:
•
The response levels of the pilot.
•
The language.
•
The time/date format.
Refer to the
ST70 Autopilot Controller/SmartPilot X Commissioning Instructions
for
the appropriate procedures.
Other setup procedures may be useful on a day-to-day basis. These include:
•
Changing the screen brightness level. See
Brightness
on
page 7
.
•
Changing the screen colors.See
Colors
on
page 7
.
•
Changing data units. See
Units
on
page 8
.
•
Setting local time. See
Time and date
on
page 9
.
•
Auto Tack Angle (sailboats only). See
Auto Tack Angle
on
page 15
.
•
Enable or disable Gybe Inhibit (sailboats only). See
Gybe Inhibit
on
page 15
.
2.1 Using the menu navigation keys
Use the
MENU
key to enter the menu system.
Use the < and > keys to:
•
scroll to the required option or setting.
•
increase or decrease a setting.
Use the
ENTER
key to:
•
select a menu option.
•
accept a setting and exit to the previous screen.
Use the
CANCEL
key to exit to the previous screen without changing anything.
When you have made the changes you require, press
CANCEL
as many times as
required to exit to the Pilot View screen.
Summary of Contents for ST70 Instrument
