Raymarine SmartPilot Verado, Installation And Commissioning Manual

Page: 49 / 72

SmartPilot Verado Installation and Commissioning Guide 39
Data pages
ST6002 display controllers have 7 user-configurable pages, ST7001 and ST8001 have 15. The
following screens allow you to modify the settings for the data pages. These define the
SeaTalk/NMEA data pages that will be available during normal operation (see
SmartPilot
Controller Operating Guide
). Each data page setup screen initially shows the title DATA PAGE
and the page number. After 1 second, the text changes to the title of the data set for that page.
The default settings are:
Note:
It is good practice to keep the
BTW
and
DTW
pages for display. If your SmartPilot receives a man
overboard
(MOB)
message, these data pages will show the bearing and distance to the
MOB
location.
To change the data displayed on a data page:
• Press disp to move to the appropriate data page setup screen.
• Use the -1 and +1 keys or the rotary control to scroll forwards or backwards
through the available data pages (see the following table).
• Then press disp to move to the next data page you want to change, or press and hold
standby for 2 seconds to save changes.
Options
HDG MAG Magnetic heading
HDG TRUE True heading.
Data Page Default Setting
1 XTE (Cross Track Error)
2 BTW* (Bearing to Waypoint)
3 DTW* (Distance to Waypoint)
4 RESPONSE
Remaining pages NOT USED (These pages are not displayed when you scroll
through the data pages during normal operation)
Available Data Pages Displayed as
Speed Knots SPEED KTS
Log LOG XXXX.X
Trip TRIP XXX.X
Average Speed, Knots AV. SPD KTS
Wind Direction e.g. WIND PORT