Raymarine SmartPilot Verado, Installation And Commissioning Manual

Page: 4 / 72

ii SmartPilot Verado Installation and Commissioning Guide
Safety notices
WARNING: Product installation
This equipment must be installed and operated in accordance
with the instructions contained in this handbook. Failure to
do so could result in poor product performance, personal
injury and/or damage to your boat.
CAUTION:
There are no user serviceable parts in the SmartPilot
controller, compass or pump. The only user serviceable parts
in the course computer are fuses. Only authorized Raymarine
service technicians should service all other parts.
CAUTION:
This system requires 12 V dc power. Before installing, check
your boat’s power supply voltage is 12 V dc.
CAUTION:
This system is not suitable for boats fitted with triple
engines, or where the hydraulic steering cylinders are
connected in parallel. If you are unsure whether this system
can be fitted to your boat, please consult your local
authorized Raymarine service representative.
As correct performance of the boat’s steering is critical for safety, we
STRONGLY
RECOMMEND
that an Authorized Raymarine Service Representative fits this product. You
will only receive full warranty benefits if you can show that an Authorized Raymarine Service
Representative has installed or commissioned this product.
WARNING: Electrical safety
Make sure the power supply is switched off before you make
any electrical connections.
WARNING: Calibration settings
We supply this product with default calibration settings that
do not match those required for a Mercury Verado
installation. You must complete the commissioning section
starting on
page 24
, before going to sea.
WARNING: Navigation aid
Although we have designed this product to be accurate and
reliable, many factors can affect its performance. As a result,
it should only be used as an aid to navigation and should