background image

110

HSB Series  LCD Display

To save and name the current track:

1. Press the 

TRACK LIST

 soft key. The track list pop-up and associated soft keys

are displayed.

2. The next available entry on the track list is highlighted.

(If required, you can use the trackpad to select another position in the list;
this can be a blank slot, or an existing track that you no longer require).

3. Press 

SAVE TRACK

. The name track soft keys are displayed.

YES

NO

NAME TRACK?

D4256-1

4. If you do not wish to name or rename the track, press the 

NO 

soft key (or

CLEAR

) to clear the list. The track is saved and is listed as Track Not

Named.
If you wish to name the route press the 

YES 

soft key. Use the trackpad to

move the cursor right or left to the character you wish to edit. Then use the
top or bottom of the trackpad to increase or decrease the letter or number.

5. Press 

ENTER 

to finish and clear the Track List, then to return to the default

soft key display, press 

ENTER 

again or 

CLEAR

.

Naming, Erasing and Showing a Track

To name an existing track, erase a track or show a track, you select the track
from the track list, then press the appropriate soft key as follows:

1. Press the 

TRACK LIST

 soft key. The Track List is displayed. The grey

selection bar indicates the selected track.
Select the required track then press the appropriate soft key.

2. If you 

NAME 

a track, use the trackpad to move the cursor right or left to the

character you wish to edit. Then use the top or bottom of the trackpad to edit
the letter or number. Press 

ENTER 

finish the operation or 

CLEAR 

to cancel

the name.

3. If you 

ERASE 

a track you are prompted to confirm.

Press 

NO 

to cancel the operation, then 

ENTER 

if you wish to remove the

track list.
Press 

YES 

to erase the track from the list, then 

ENTER 

to remove the track

list.

4. If you 

SHOW 

a track, and you have a current track on screen, you are

prompted to save the track. Proceed as previously described in Clearing the
Current Track.
Alternatively, press the 

NO 

soft key to cancel the 

SHOW TRACK

 operation.

The track list is removed and the selected track is displayed.

Managing

Tracks

TRACK

LIST

NAME

TRACK

ERASE
TRACK

SHOW

TRACK

TRACK

LIST

Summary of Contents for RL70C



























































































































































































































Reviews: