Raymarine RL70C, Owner'S Handbook Manual

Page: 118 / 218

104 HSB Series LCD Display
Advancing to a Waypoint
➤
Once you are following a route, you can advance to the next waypoint, even if
you have not reached the current target waypoint:
1. If necessary, press the
GOTO
default soft key to display the Goto/Follow
soft keys.
D4172-1
RESTART
XTE
WAYPOINT
ADVANCE
GOTO
CURSOR
STOP
FOLLOW
2. Press the WAYPOINT ADVANC E soft key. The current leg of the route is
abandoned and the the next waypoint becomes the target. The display is
updated to show the new route leg.
Restart Cross Track Error (XTE)
Whilst you are following a route, or going to a target point, you can restart the
XTE. This sets the XTE to zero and moves the origin to the actual vessel
position.
Restarting XTE is useful if you find yourself off track and want to go straight to
your target, rather than get back onto the original track.
➤
To restart XTE:
1. Press the
GOTO
default soft key, the Follow/Goto soft keys are displayed.
2. Press the
RESTART XTE
soft key. The route origin moves to the current vessel
position, thus the XTE becomes zero.
Going To an Individual Target Point
Rather than following a route, you can go directly to a selected target point, this
can be an existing waypoint (not in the current route), or the cursor position.
➤
To navigate directly to an existing waypoint:
1. Use the trackpad to position the cursor over the required waypoint until the
letters WPT and the waypoint soft keys are displayed.
D4163-1
GOTO
WAYPOINT
EDIT
WAYPOINT
ERASE
WAYPOINT
MOVE
WAYPOINT
Alternatively, you can select the waypoint from the waypoint list as described in
Section 5.3 .
2. Press the
GOTO WAYPOINT
soft key.
Navigation to the selected waypoint begins. The soft key
STOP GOTO
is
displayed.
WAYPOINT
ADVANCE
RESTART
XTE
GOTO
GOTO
WAYPOINT
GOTO
Going to a
Target Point