Raymarine Ray 90, Installation And Operation Instruction Manual

Page: 48 / 192

4.2 Connections overview
Connection Connects to Suitable cables
1
GNSS (GPS) antenna
connection Passive GNSS antenna GNSS antenna’s fitted cable.
2 Earth stud DO NOT CONNECT N/A
3 VHF antenna connection VHF antenna or Splitter VHF antenna’s fitted cable.
4 Power and data connection • 12 V dc power supply
• NMEA 0183 devices
• Loud Hailer
• Suitable power extension
or circuit breaker.
• cable supplied with your
NMEA 0183 device
• Loud hailer’s fitted cable
5 HS 1 (Handset station 1)
connection Wired handset or Adaptor
cable Wired handset’s fitted cable.
6 HS 2 (Handset station 2)
connection Wired handset or Adaptor
cable Wired handset’s fitted cable.
7 Hub connection Wireless hub connection Wireless hub’s fitted cable.
8 N2K (NMEA 2000)
connection SeaTalkng ® / NMEA 2000
backbone
The supplied DeviceNet to
SeaTalkng ® adaptor or a
DeviceNet spur cable.
Bare end wire connections
Your product is supplied with bare end wire connections. You must ensure that ALL bare end wires
are adequately protected from short circuit and water ingress.
Bare ended wire connections
It is recommended that bare ended wire connections are made by soldering or using crimp
connectors and then protected by wrapping the connection in insulation tape.
48