RayTech Navigator User’s Guide
4-26
Using the Waypoint Recycle Bin
When you delete waypoints, they are placed into a recycle bin from
which you can later (in the same Navigator session) retrieve them if
you need to. It’s important to keep in mind that the waypoint recycle
bin is emptied, permanently deleting all waypoints it contains, each
time you restart Navigator.
To retrieve waypoints from the recycle bin:
1.
Select
Edit Route
from the Route menu, then click
Waypoint
Properties
to display the Waypoint Properties dialog box
(Figure 4-20).
2.
As shown in Figure 4-25, click the
Group Name
drop-
down, then select
Recycle Bin
from the displayed choices.
The Move Waypoints Between Groups dialog box is
displayed (Figure 4-26).
The Move Waypoints Between Groups dialog box contains
two drop-down menus that allow you to select the waypoint
groups you want to move waypoints between.
3.
From the left-most drop-down, select the waypoint group
you want to restore waypoint to (Figure 4-26).
4.
From the right-most window (the Recycle Bin), select the
waypoints you want to retrieve.
5.
Click
to retrieve and restore the waypoints.
Figure 4-25. Selecting the Recycle Bin
Click drop-down, then select
Recycle Bin
Summary of Contents for Marine GPS System
