Raymarine Evolution EV-2, Installation Instructions Manual

Page: 28 / 42

4.2 Post-installation checks
These checks should be carried out after installation, and prior
to the commissioning of the autopilot system.
1. Switch on power to the autopilot system and associated
equipment.
• ACU (for EV-1 systems only).
• Autopilot control head.
• SeaTalk ng data bus (if this has its own power supply).
2. Check that the autopilot control head powers up. If the
display is blank press and hold the Power key for 2 seconds.
3. Check the display for error messages that could indicate a
problem with the installation.
For assistance with diagnosing faults:
• Refer to the troubleshooting information supplied with the
product, or
• contact Raymarine customer support.
4.3 Autopilot system setup
Important: Before using the autopilot system it is essential
that it is properly commissioned in accordance with the setup
instructions.
1. Perform an initial power-on test to ensure all components
are working correctly.
2. Refer to the latest version of the 81331 p70 / p70R User
reference handbook for detailed instructions on how to setup
the Evolution autopilot system.
28 Evolution EV-2