Raymarine Evolution EV-2, Installation Instructions Manual

Page: 14 / 42

2.4 System integration
The Evolution components are compatible with a wide range of marine electronics devices.
0
D12761-1
1
2
7 9 8
3 4 5
SeaTalkng
6
Note: To prevent potential data bandwidth issues, do NOT connect an SR50 weather receiver to a system that includes Evolution
autopilot components. The SR50 should be connected to a dedicated system bus which is isolated from the SeaTalk ng bus
that hosts the Evolution components.
Item Device type Maximum Quantity Suitable Devices Connections
1 Heading sensor and course
computer. 1 EV-2 • SeaTalk ng
2 SeaTalk ng backbone 1 • SeaTalk ng
• SeaTalk via the optional
SeaTalk to SeaTalk ng
converter.
• SeaTalk ng
• SeaTalk via the optional
SeaTalk to SeaTalk ng
converter.
3 Autopilot control head.
Note: All SeaTalk
control heads have limited
functionality with the
Evolution system. Refer
to the SeaTalk to SeaTalk
ng
converter handbook (87121)
for more information on
these limitations, and how to
connect a SeaTalk autopilot
control head to an Evolution
system.
As determined by the SeaTalk ng
bus bandwidth and power
loading.
• p70.
• p70R.
• ST70 / ST70+ (limited
functionality)
• ST6002
• ST7002.
• ST8002
• S100 remote (repeat
controller only).
• Smart controller (repeat
controller only).
• SeaTalk ng
• SeaTalk via the optional
SeaTalk to SeaTalk ng
converter.
4 SeaTalk ng multifunction displays.
Note: The Evolution EV-1
provides heading data to
multifunction displays, for
use in chart and radar
functions such as radar
overlay and MARPA.
6 • New a, c, e Series: a65 / a67
/ e7 / e7D / c95 / c97 / c125 /
c127 / e95 / e97 / e125 / e127
/ e165.
• C90W / C120W / C140W.
• E90W / E120W / E140W.
• SeaTalk ng
14
Evolution EV-2