Raymarine Evolution EV-2, Installation Instructions Manual

Page: 15 / 42

Item Device type Maximum Quantity Suitable Devices Connections
5
GPS receiver. As determined by the SeaTalk ng
bus bandwidth and power
loading.
GPS position data is usually
received from a SeaTalk
ng
multifunction display. If your
system does NOT include a
multifunction display, or your
multifunction display does
NOT include an internal GPS
receiver, an external SeaTalk
ng
GPS receiver will be required.
• SeaTalk ng multifunction
display with internal GPS
receiver.
• RS125 GPS (via optional
SeaTalk1 to SeaTalk ng
converter.
• RS130 GPS.
• SeaTalk ng
6
Drive interface unit
1
• Teleflex Optimus (as supplied
separately by Teleflex).
• Volvo Penta EVC (as supplied
separately by Raymarine).
Note: Your drive system
will include either one of
these interface units, NOT
both.
• SeaTalk
ng
7
AIS receiver / transceiver
Note: The Evolution
system can provide magnetic
heading information to an
AIS unit. Transmission
of heading information is
optional for AIS transceivers,
and they only transmit true
heading information, NOT
magnetic.
1 • AIS 350.
• AIS 650.
• SeaTalk ng
8 Speed / Depth transducer As determined by the SeaTalk ng
bus bandwidth and power
loading.
Any transducer compatible with
the iTC-5 converter or ST70
transducer pod. • Analog transducer
connections via iTC-5
converter or ST70 transducer
pod.
• Other transducer connections
via compatible Sonar Module.
9 Raymarine Wind transducer
As determined by the SeaTalk ng
bus bandwidth and power
loading.
• Short arm wind vane
transducer.
• Long arm wind vane
transducer.
• Short arm masthead wind
transducer.
• Long arm masthead wind
transducer.
Analog transducer connections
via iTC-5 converter or ST70
transducer pod.
Planning the installation
15