Raymarine Evolution EV-2, Installation Instructions Manual

Page: 11 / 42

calibration settings required by existing autopilots are no
longer necessary.
Parts supplied — EV-1 and EV-2
0
D12757-1
9
8
7
1
2
3
4
5
6
Item Description Quantity
1 Mounting trim. 1
2 EV-1 / EV-2. 1
3 Sealing ring. 1
4 Mounting tray. 1
5 Sealing ring. 1
6 Wall mounting bracket. 1
7 Screws for deck or bracket mounting. 4
8 Screws for wall bracket. 3
9 Documentation pack. 1
Evolution SeaTalk ng cable kit
A SeaTalk ng cable kit is available for Evolution components.
This cable kit provides the cables required to make all the
SeaTalk
ng connections for some typical Evolution systems. The
kit is supplied with certain Evolution systems. The kit is also
available as an optional accessory, part number
R70160 . If you
require additional SeaTalk ng cables or accessories to complete
your installation, refer to 3.8 SeaTalk
ng
cables and accessories
for a list of part numbers.
Cable kit contents
6
4
5
3
2
1
D12759-2
Item Description Quantity Length
1 SeaTalk ng power
cable.
1 0.4 m (1.3 ft)
2 SeaTalk ng backbone
cable
1 5 m (16.4 ft)
3 SeaTalk ng spur
cable.
1 0.4 m (1.3 ft)
4 SeaTalk ng 5-way
connector block.
1
—
5
SeaTalk ng T-piece.
2
—
6 SeaTalk ng
terminator.
2
—
Parts supplied — DeviceNet cable kit
1
3
2
D12765-1
Item Description Quantity
1 SeaTalk ng power cable 0.4 m
(1.3 ft).
1
2 DeviceNet / SeaTalk ng
adaptor cable (Female).
2
3 SeaTalk ng terminator. 2
Planning the installation
11