Raymarine e7, Installation Instructions Manual

Page: 8 / 124

Caution: Transducer cable
Do NOT cut, shorten, splice the transducer cable or
remove the connector. If the cable is cut, it cannot be
repaired. Cutting the cable will also void the warranty.
Caution: Power supply protection
When installing this product ensure the power source
is adequately protected by means of a suitably-rated
fuse or automatic circuit breaker.
Caution: Care of chart and memory
cards
To avoid irreparable damage to and / or loss of data
from chart and memory cards:
• Ensure that chart and memory cards are fitted the
correct way around. DO NOT try to force a card into
position.
• DO NOT save data (waypoints, routes, and so on)
to a chart card, as the charts may be overwritten.
• DO NOT use a metallic instrument such as a
screwdriver or pliers to insert or remove a chart or
memory card.
• Safe removal. Always power the unit off before
inserting or removing a chart or memory card.
Caution: Ensure chart card door is
securely closed
To prevent water ingress and consequent damage to
the display, ensure that the chart card door is firmly
closed. This can be confirmed by an audible click.
Caution: Sun covers
• To protect your product against the damaging
effects of ultraviolet (UV) light, always fit the sun
covers when the product is not in use.
• Remove the sun covers when travelling at high
speed, whether in water or when the vessel is being
towed.
Caution: Cleaning
When cleaning this product:
• Do NOT wipe the display screen with a dry cloth, as
this could scratch the screen coating.
• Do NOT use abrasive, or acid or ammonia based
products.
• Do NOT use a jet wash.
TFT Displays
The colors of the display may seem to vary when viewed against
a colored background or in colored light. This is a perfectly normal
effect that can be seen with all color Thin Film Transistor (TFT)
displays.
8 e7 / e7D — Installation instructions