Raymarine e7, Installation Instructions Manual

Page: 101 / 124

6.9 WiFi troubleshooting
Aspects of the installation can cause problems with the data shared between wireless devices. Such problems, their possible causes and
solutions are described here.
Problem Possible causes Possible solutions
Ensure that WiFi is enabled on the multifunction display ( Homescreen: >
Set-Up > System Settings > Wireless Connections > WiFi > ON ).
Ensure that the “WiFi” option is enabled on the iPhone (available from the
phone’s Settings menu).
No wireless connection. iPhone does not have a wireless
connection established with the
multifunction display.
Ensure that the Raymarine connection is selected as the WiFi network. If a
passcode has been specified for the multifunction display’s WiFi connection
ensure that the same passcode is entered into the iPhone when prompted.
Download the “Raymarine Viewer” iPhone app from the Apple App Store. iPhone does not have “Raymarine Viewer”
iPhone app installed and running.
Start the “Raymarine Viewer” app on the iPhone.
No video streaming to iPhone.
“Display Streaming” is NOT enabled on
the multifunction display. Enable “Display Streaming” ( Homescreen: > Set-Up > System Settings >
Wireless Connections > Display Streaming > ON ).
Download the “Navionics Marine” iPhone app from the Apple App Store. iPhone does not have “Navionics Marine”
iPhone app installed and running.
Start the “Navionics Marine” app on the iPhone.
No waypoint / routes synchronization with
Navionic Marine app.
Chart application is not running on the
multifunction display. Start the chart application on the multifunction display.
Weak or intermittent WiFi signal. Interference from other wireless devices
in the vicinity. Multiple wireless devices running simultaneously (such as laptops, phones,
and other wireless devices) can sometimes cause wireless signal conflicts.
Temporarily disable each wireless device in turn until you have identified
the device causing the interference.
Troubleshooting
101