Raymarine e7, Installation Instructions Manual

Page: 76 / 124

5.1 Initial power on test
Touchscreen overview
The touchscreen provides a quick way of performing many common
functions.
Some of the functions you can operate with the touchscreen include:
• Accessing applications.
• Adding and editing applications pages.
• Placing and editing waypoints.
• Building routes.
• Panning the chart display.
• Placing and moving the cursor.
Note: Raymarine strongly recommends that you familiarize
yourself with touch operations while your vessel is anchored
or moored. You may find it helpful to use the simulator mode
(accessible from
Homescreen > Set-up > System Settings )
in these situations.
Controls
D12179-1
2
4
5
6
7
3
1
1. Touchscreen — you can touch the screen to operate many
common functions, including all menu operations.
2. Menu — accesses menus. Press again to close menus.
3. UniControl — provides a joystick and rotary control and an OK
button for using menus and applications.
4. Back — press to return to a previous menu or dialog level.
5. WPTS / MOB — press and release to access the waypoint
options. Press again to place a waypoint. Press and hold to
place a Man Overboard (MOB) marker at your current position.
6. Power — press once to switch the unit ON. Once powered on,
press the Power button again to adjust the brightness, access
the power controls for external devices, and access the autopilot
controls. Press and hold to switch the unit OFF.
7. Chart card slots — open the card door to insert or remove
MicroSD cards. There are 2 card slots (labelled 1 and 2), used
for electronic charts and archiving waypoint, route and track
data.
76 e7 / e7D — Installation instructions