Raymarine E12207, Installation Instructions Manual

Page: 26 / 42

35º 35º
D11860-1
1 2
1. Steering system end stop: –35 degrees.
2. Steering system end stop: +35 degrees.
Caution: Total rudder movement
Ensure that the rudder movement is limited by the
steering end stops before the push rod reaches its
end stop. Failure to do this could damage the drive
and will invalidate the warranty.
3.5 Hydraulic pump mounting
The hydraulic pump must be mounted in a suitable location to
ensure reliable performance.
• Before mounting the hydraulic pump, refer to the guidance
provided in the 2.8 Location and mounting requirements section.
• Drill 2 mounting holes.
• Secure the pump to the appropriate part of your vessel using
suitable stainless steel bolts, washers and lock nuts.
• Fully tighten the nuts to minimize vibration.
26
Hydraulic Linear Drive Installation instructions