Raymarine E12207, Installation Instructions Manual

Page: 13 / 42

2.3 Reservoir
D11866-1
1
2
3
4
5
1. Transit screw — must be removed from the cap before use.
2. Screw cap — seal must be removed from cap before use.
3. Fill level — reservoir must be filled between the minimum and
maximum levels.
4. Mounting hole — for securing the reservoir to a suitable part
of your vessel.
5. Tap — controls the flow of hydraulic fluid to the pump.
2.4 Product overview
The Hydraulic Linear Drive is intended to operate a vessel’s steering
mechanism as part of a Raymarine autopilot system.
The Hydraulic Linear Drive is designed for vessels with existing
mechanical steering systems, NOT hydraulic steering systems. It
is mounted below decks and moves the rudder directly by pushing
the tiller arm or rudder quadrant.
The Hydraulic Linear Drive provides a totally isolated autopilot
steering system consisting of:
D11851-1
1
10
2
3
4
5
6
7
8
9
11
1. Hydraulic fluid reservoir — supplies hydraulic fluid to the
system.
2. Reservoir pipe — transports the hydraulic fluid from the
reservoir to the pump.
3. Ram pipe — low-pressure line between the pump and the
hydraulic ram.
4. Reversing hydraulic pump — powers the hydraulic arm.
5. Motor cables — for connecting the pump to a course computer.
6. Rod end — connects the hydraulic ram to your vessel’s tiller or
rudder quadrant.
Planning
13