40
DSM300 Operation with PLUS Series Displays
2. Press the LIGHT soft key if it is not already highlighted.
3. The LIGHT soft key toggles lighting ON/OFF.
4. Use the trackpad (up or down) to increase or decrease the setting. You can
press and hold the trackpad to change the setting more rapidly. The lighting
level is adjusted as you change the setting.
5. Press the CONTRAST soft key. Adjust the setting in the same way as for the
lighting. There are 64 different contrast levels.
6. Press
ENTER
to return to the default screen, with the new lighting and con-
trast levels retained, or press
CLEAR
to discard the changes and return to the
default screen.
If lights are left ON when you switch off the display, the next time the display is
switched on, the lights will be ON, but at the default setting of 42%. The new
contrast level is retained until you reset it, unless you set the control very low or
very high; in this case, the contrast will be restored as follows:
Contrast set > 30% restored to 30%
Contrast set > 70% restored to 70%
Brightness and Color Settings (Color Displays)
The
MULTI
key on a color LCD unit provides controls to set up the display colors
and brightness. You can choose the background color and the color threshold;
color threshold lets you determine which echoes are displayed, by selecting the
minimum color strength the sounder uses.
You can also select the color set, for a bold or soft color palette. The brightness of
the screen can be adjusted over a wide range, suitable for viewing in daylight
(high brightness level) or at night (low brightness level).
The key lighting is automatically adjusted as you alter the screen lighting, so that
you can always find the keys. If you set the backlight to a high level, the key
lighting is dimmed; if you set the backlight to a low level, the key lighting level is
increased.
37%
70%
LIGHT
CONTRAST
WHT LINE
OFF ON
D4895-2
POWER
AUTO LO HI
CONTRAST
50%
