Chapter 2: Installation
2-15
If the transducer cable is accidentally removed while the
DSM250 is powered on, remove power from the sounder module,
replace the transducer cable, and then return power to the
module. As a safety feature, the DSM250 only recognizes that the
transducer is connected at power-up.
EMC Conformance
Always check the installation before going to sea to make sure
that it is not affected by radio transmissions, engine starting, etc.
Figure 2-9:
Properly Mounted Sounder Module
D6177-1
Summary of Contents for DSM250
