Raymarine DSM250, Owner'S Handbook Manual

Page: 17 / 122

Chapter 1: Overview 1-7
Operating Modes
Depending on the types of display(s) you have connected via
hsb 2
,
up to four full-screen modes – sonar, chart, radar, and data log are
available. You select the operating mode using the
DISPLAY
key
as described in Chapter 3 .
You can also set Windows On to split the display into two half-
screen windows (horizontal or vertical) to show supplementary
data, or to display sonar and chart or radar simultaneously.
Horizontal Half -Screen Window Options
Using horizontal half screens, the main operating mode is dis-
played in the upper window; you choose what is displayed in the
lower window. The following information, if available on your
system, can be shown:
Vertical Half -Screen Window Options
This option splits the sounder vertically. The left hand window dis-
plays data boxes; there are three different sets of data (A, B, and C)
that you can select for display. The following information is avail-
able only in Sonar Mode:
Table 1-1: Horizontal Half-Screen Window Options
Full-screen
mode
Horizontal Half-Screen Window Options
Sonar Mode Course Deviation Indicator (CDI), Bearing and Distance
Indicator (BDI), Depth/Temp graph, Chart plotter, Radar
Chart Mode CDI, BDI, Navigation Data (databoxes), Radar, Sonar
Radar Mode CDI, BDI, Navigation Data, Chartplotter, Sonar
Data Log Mode Half-screens not available
Table 1-2: Vertical Half-Screen Window Options
Full-screen
mode
Vertical Half-Screen Window Options
A Temperature, Speed, Depth
B Position (latitude and longitude), Course Over Ground
(COG), Speed Over Ground (SOG), Depth
C Waypoint Range and Bearing, COG, SOG, Depth