Raymarine Dragonfly 6, Installation And Operation Instructions Manual

Page: 79 / 116

8.16 Community layer
If supported by your cartography type, you can
display User Generated Content (UGC) on the Chart
application.
1. Community feature On.
2. Community feature Off.
To check if your Navionics cartography supports
community edits downloads please refer the
Navionics website: for information and instructions
on downloading the updates to your chart card.
Switching the community layer on and off
If supported by your cartography type, the User
Generated Content (UGC) overlay can be switched
on and off by following the steps below.
From the Chart application menu:
1. Select
Chart Setting
.
2. Select Community Edits: so that On is selected
to display UGC, or
3. Select Community Edits: so that Off is selected
to turn off UGC.
8.17 Sonar logging
When using compatible Navionics
®
cartography
you can share sonar information using Navionics
®
SonarCharts
™
.
The Sonar Logging function allows logging of depth
and position data to a compatible Navionics
®
chart
card. The saved data can then be uploaded to the
Navionics
®
website to help improve the contour
detail of Sonar Charts on your MFD . Refer to the
Navionics
®
website for instructions on how to
upload your sonar logs.
Enabling and disabling Sonar logs
Sonar logging can be enabled or disabled at any
time.
From the Chart application menu:
1. Select
Chart Setting .
2. Select Sonar Logs: so that On is selected to
enable sonar logging, or
3. Select
Sonar Logs:
so that Off is selected to
disable sonar logging.
Chart application
79