Chapter 4: Setting Up
39
3. Use trackpad up/down to highlight the desired parameter, then use
trackpad left/right to select the desired setting.
Note:
There are two screens for Chart Set-up. Scroll past
MORE..
. to ac-
cess the other screen.
4. When the desired values have been set, press
ENTER
to clear the
menu and return to the set up function bar.
5. Press
CLEAR
to return to the normal display.
The table below lists the Chart Set up parameters and their options, shows
the factory default setting and provides a space to make a note of the new
default setting.
.
Parameter
Options
Factory
Default
New Setting
ORIENTATION
NORTH UP
COURSE UP
HEAD UP
NORTH UP
PLOTTER MODE
OFF/ON
ON
SHOW WAYPOINTS
OFF/ON
ON
WAYPOINT SYMBOL
FISH, SKULL,
ANCHOR or X
X
AUTOZOOM
OFF/ON
ON
SCREEN AMPLIFIER
OFF/ON
ON
COG VECTOR
OFF/ON
OFF
ARRIVAL CIRCLE
0.01nm, 0.05nm,
0.1nm, 0.5nm
0.1nm
ANCHOR ALARM
OFF, 0.01nm,
0.05nm, 0.1nm,
0.5nm
OFF
XTE ALARM
OFF, 0.01nm,
0.05nm, 0.1nm,
0.3nm, 0.5nm
OFF
SELECT CHART
OFF/LOAD CHART
OFF
CHART TEXT
OFF/ON
ON
CHART BOUNDARIES
OFF/ON
ON
SAFETY CONTOURS
OFF/2m/5m/10m/
20m
2m
