Page 22
Step 2: Remove any debris. Secure the inverter bracket to the wall using the supplied screws (2 from battery
instal washers for the bottom holes and 2 without washers for the top holes).
Step 3: Fit the inverter on to the bracket. Take care to ensure the rear tang correctly engages with the bracket.
Step 4: Loosely fit the 4xM5x12mm screws through the battery brackets in to the inverter. Before tig
htening
the screws position the inverter so that the removable inverter cover fits flush with th
e battery front
panel(s). Do not fit the cover at this stage.
