Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide RFL-QCW300/3000
12
f)
During the installation and disassembly process, please take care to gently move the
fiber connector, do not be shocked.
g)
In the process of installation the feeding fiber and fiber connector, please make sure that
the surrounding environment is clean, otherwise it may pollute the fiber connector(do to
use fans to avoid dust)
h)
The optic feeding fiber must not be bent with the radius less than 20 cm during
transportation
，
storage and 30 cm when in operating.
CAUTION:
All the cables can only be connected when power supply is off. It is possible to
damage the laser by installing the control line under electricity.
CAUTION:
Ensure that the minimum bending radius is greater than 30 cm. Avoid excessive
twisting during the robotic arm movements. Excessive bending will damage the
laser.
CAUTION:
Make sure the aperture and the cavity of the process optics is clean.
Keep the protective cap properly, prevent it from contamination. Or the aperture
will be contaminated when capped.
受
控
武汉锐科
